Slide nutWhen installing the slider nut, it needs to be pre-plugged into the profile groove to facilitate the connection of various accessories on the profile.
The slider nut is a front nut. During installation, it needs to be pre-buried in the pit of the aluminum profile and matched with the hexagon socket bolt to connect the accessories on the aluminum profile. It should be noted that after the front slider nut is fixed to the frame, it will be very troublesome to modify it later, so pay attention to the correctness of the frame structure of the profile in the early stage.
The T-bolt can be directly put into the aluminum profile groove, it can be automatically positioned and locked during the installation process, and is often used in conjunction with the flange nut. It is the standard matching connector when installing corner fittings. It can be selected and used according to the profile groove width and different series of profiles. T-bolts are movable anchor bolts.
Name: Stainless steel T-bolt (hammer head or hammer-shaped bolt)
English name: T bolt
Material: stainless steel SUS304
Note: T-shaped bolts, called hammer bolts in European standard, are made of carbon steel, and the surface is galvanized or nickel-plated.
Name: T-slot bolt
Material: 1045 medium carbon steel
Specifications: full range
Description: 1045 material, produced by red forging process, grade 8.8 after heat treatment, usually die plate bolts.
Elastic fasteners for profilesThe elastic fastener of the profile is a special connection for the 8/10 series profile. When two sections of profile are connected at right angles, they are inserted into the pit of one section of profile and used with special bolts. This connection method is tight and reliable, and this accessory has the function of anti-loose and anti-vibration.
Angle groove connector
It is used for right-angle connection of two profiles. When installing, insert the two ends into the groove of the profile and lock the fastening screws. Please choose different angle groove connectors according to the groove width and connection method of the profile.
T type connecting plate
It is used for T-shaped connection of profiles, no drilling is required, high connection strength, high-tech materials, and military technology.
L-shaped connecting plate
Used for right-angle external connection of profiles without drilling, high connection strength, high-tech materials, and military technology.
End face connecting plate
The end-face connecting plate is mainly used for connecting rectangular and large-size porous square profiles with hoof feet, casters and other accessories to play a transitional role.
Interval connection block
The end of the connecting block is directly inserted into the groove of the profile, and it is tightly fixed on the profile after it is rotated 90 degrees. Then you can install various panels such as plexiglass on the profile, and then lock it with bolts, which is simple to install and easy to disassemble.
The hinge is used for the movable connection between two sections of profile, its rotation range is 180 degrees, and it has a variety of connection methods.
Anchor connection pin
Used for 90 degree right angle connection of two aluminum profiles. When installing, it is hidden inside the profile, please process the hole position according to the actual object.
Used for non-90 degree oblique connection of two aluminum profiles. When it is installed, it is hidden inside the profile, please pay attention to its connection method.
It is used for the straight-line extension connection between two profiles. When installing, insert it into the contact groove of the two profile pairs, and then lock it with a fastening screw.
Special angle groove connector
Used for 45-degree connection of 1530 profile, insert both ends into the profile groove during installation, and lock the fastening screws.
Profile built-in connector
The main purpose: This connector can be used when the profile is connected in a cross or at a right angle. When assembling, it is necessary to drill the installation process holes in the profile specification and size position to bury the accessories in it, and at the same time put the elastic nut block into the pit of another profile, and then tighten the bolts.
Industrial aluminum profile coupling angle
Corner corner pieces of profile
For the foot support of the profile bracket, the bolts, nut blocks and expansion bolts used for connecting the selected size according to the profile size need to be equipped separately.
135 degree bracket for profile
The 135 degree bracket is cut from the extruded profile and processed by drilling. The surface is silver-white anodized (the end surface is not oxidized), and the connection strength is high. Good flexibility and general performance, simple and convenient installation. Mainly used for 135 degree connection of profiles.
Right-angle brackets for profiles
The right-angle bracket is cut from the extruded profile and processed by drilling. The surface is silver-white anodized (the end surface is not oxidized), and the connection strength is high. Good flexibility and general performance, simple and convenient installation. Mainly used for T-shaped, L-shaped, or cross connection of profiles. Note: Special processing can be carried out according to customer needs.
45 degree bracket for profile
The 45-degree bracket is cut from the extruded profile and processed by drilling. The surface is silver-white anodized (the end surface is not oxidized), and the connection strength is high. Good flexibility and general performance, simple and convenient installation. Mainly used for 45 degree angle connection of profiles.
Three-dimensional angle connector of profile
This corner connection is a special connection piece for semi-circular profiles. It can connect two or three profiles together. Together with the matching cover, it is very simple and beautiful. Connecting bolts need to be equipped separately.
Steering connection angle piece of profile
Used to connect two non-perpendicular profiles, connecting bolts and nut blocks need to be equipped separately.
Powerful corner pieces of profile
It is often used to support and fix the connection point of the profile and the profile that is subject to strong or vibration. The T-bolt and nut for the connection need to be equipped separately.
Angle pieces of profile
It is used to strengthen the supporting force of the connected profile points, and can also be used as a connection method for profiles that need to be moved. T-bolts and nuts for connection need to be equipped separately.
Decorative parts for profiles
End cover of profile
The purpose of the cover plate is mainly used to cover the two ends of the aluminum profile, which plays a beautiful role.
U-shaped groove strip for profile
After the U-shaped groove is placed in the profile groove, the plexiglass and other plates can be inserted to play the role of buffer, protection and sealing.
Flat seal groove strip for profile
The flat sealing groove strip can cover the grooves on the surface of the profile, play a decorative role, and can also keep the surface of the profile tidy.
Assembly parts for profiles
General profile connecting plate on both sides
Purpose: Used for external high-strength connection between profiles.
Applicable specifications: 30 and 40 series profiles
Angle adjustment plate of profile
Angle adjustment plate can realize the adjustment of the maximum angle between profiles
It is used to connect the active connection between the profile and the profile or board. It can be detached after connection, and the connecting screw and nut block need to be equipped separately.
The advantage of metal hinges is that they are high in strength, can bear greater stress and open and close freely.
This piece can be slid back and forth by inserting it into the groove of the profile, hanging various tools, wires and other objects.
When the door is closed, it plays a fixed role and has an adsorption effect, so that the door will not open and close at will.
Install the handle on the profile for easy opening and carrying. Connecting bolts and T-nut blocks need to be matched separately.
Support for profile
Profile fixing seat
The profile fixing seat is used for the support between the profile and the ground or the platform, and the expansion bolt can be placed in the ground to achieve a fixed effect.
The hoof foot is a universal accessory for various industrial aluminum profile brackets and equipment. It has the functions of support, shockproof, etc., and the height of the screw can be adjusted.
Leveling height-adjustable casters; used in occasions that require foot pad support and high-precision level adjustment. Used in conjunction with the aluminum profile frame to play a supporting and fixing role.
On machines, carts and other frames made of aluminum profiles, precise, silent, dust-proof, stacking brake (omnidirectional) casters can be installed. According to their own needs, users can choose various types, different diameters, different materials and load-bearing ranges, and whether they have brakes to stop the casters.