- About us
- |
- contact us
- |
address：No. 51 Luming Road Heavy River Management District - Qing Town Dongguan City
Q Q：2131405854
Telephone：+86 13827205356
mailbox：cnc@cncstamping.com
Current electronic products mainly use SMD packaging devices, but many high-power devices and some power modules still use perforated packaging. This is mainly because it can be easily installed on the heat sink to facilitate heat dissipatio...
In the field of PCBA and electronic products, the design itself depends on the ability of the design to adjust the temperature correctly. Heat dissipation is critical to PCBA performance, function and life cycle. What is a heat sink? In the...
There are three forms of heat propagation: heat conduction, convection and heat radiation. The propagation of lattice vibration and the movement of free electrons in metals belong to heat conduction, the heat transfer of fluid movement belon...
Instructions for use of the refrigeration sheet: The correct installation and assembly method of refrigeration fins: 1. Semiconductor refrigeration fins are installed with heat sinks on one side and conduction cooling system on the other sid...
The basic heat dissipation method on the notebook: the heat pipe is used to guide the heat to the heat sink on the edge of the machine, and the radiating fan is used to cool the heat sink. Cooling technology of notebook computer 1. Heat sink...
Researchers at the University of Florida in the United States designed a new type of heat sink antenna for highly integrated wireless systems and phased array radars. In a typical case, manufacturers must use printed circuit boards (Printed...
Thermally conductive graphite sheet heat dissipation is actually a typical thermal management system and an external cooling device. It is composed of two aspects, the radiator and the thermal cross section....
Keywords: transformer heat sink, the role of heat sink Transformer is a very important tool in our daily production. Because the machines we use in our daily production are not necessarily the 220 volts we specified, at this time we need t...
An industrial computer, the core technology is the motherboard, followed by the heat sink. KangDing, as a manufacturer of fanless industrial computer RD and production, is very important to the design and selection of heat sinks. The heat di...
What are the differences between thermal silica gel and ceramic heat sink? If discussing and distinguishing from the temperature range, material hardness, insulation performance, thermal conductivity, bonding performance, etc., the specific ...
Copper absorbs heat faster than aluminum, but copper does not dissipate heat faster than aluminum. Therefore, the radiator of the pure copper base is generally equipped with a fan with high speed and large air volume to increase the heat dis...
The high-efficiency thermal conductivity of CNC machined aluminum heat sink is the decisive factor for maintaining good heat dissipation and the most ideal medium for heat energy conversion. The characteristics are: less time, fast heating,...
LED heat dissipation technology LED aluminum heat sink fins This is the most common way to dissipate heat. Aluminum fins are used as part of the LED lamp housing to increase the heat dissipation area. Thermal conductive plastic shell The us...
The LED heat sink technology was born in 2000 and is made of semiconductor light-emitting diodes. The working principle is electroluminescence, which is the most common way of heat dissipation. Up to now, generally aluminum heat dissipation...
Cooling fins, referred to as heat sinks. It is classified as a passive heat sink in the field of electronic engineering design. The metal fins (mostly aluminum or copper, silver is too expensive and generally not used) with good thermal con...
The radiator of aluminum profile is also called radiator aluminum profile or sunflower aluminum profile. The radiator of aluminum profile has the characteristics of beautiful appearance, light weight, good heat dissipation performance and...
Composition of water-cooled radiator system The water cooling system is generally composed of the following parts: heat exchanger, circulation system, water tank, water pump and water, and heat dissipation structure can be added as needed. ...
Put forward requirements for the heat dissipation effect of the heat sink, what measures should be taken in terms of design to meet them? 1. Improve the flatness of the contact surface with the heat sink. In order to improve the heat absorpt...
